Container (Java Platform SE 7 b138)

java.lang.Object
- java.awt.Component
- - java.awt.Container

All Implemented Interfaces:

ImageObserver, MenuContainer, Serializable

Direct Known Subclasses:

BasicSplitPaneDivider, CellRendererPane, DefaultTreeCellEditor.EditorContainer, JComponent, Panel, ScrollPane, Window
```
public class Container
extends Component
```
A generic Abstract Window Toolkit(AWT) container object is a component that can contain other AWT components.
Components added to a container are tracked in a list. The order of the list will define the components' front-to-back stacking order within the container. If no index is specified when adding a component to a container, it will be added to the end of the list (and hence to the bottom of the stacking order).
Note: For details on the focus subsystem, see How to Use the Focus Subsystem, a section in The Java Tutorial, and the Focus Specification for more information.

Since:

JDK1.0

See Also:
add(java.awt.Component, int), getComponent(int), LayoutManager, Serialized Form

Nested Class Summary

Nested Classes
Modifier and Type Class and Description

protected class Container.AccessibleAWTContainer
Inner class of Container used to provide default support for accessibility.
- Nested classes/interfaces inherited from class java.awt.Component
  Component.AccessibleAWTComponent, Component.BaselineResizeBehavior, Component.BltBufferStrategy, Component.FlipBufferStrategy

Nested Classes
Modifier and Type	Class and Description
`protected class`	`Container.AccessibleAWTContainer` Inner class of Container used to provide default support for accessibility.

Field Summary
- Fields inherited from class java.awt.Component
  BOTTOM_ALIGNMENT, CENTER_ALIGNMENT, LEFT_ALIGNMENT, RIGHT_ALIGNMENT, TOP_ALIGNMENT
- Fields inherited from interface java.awt.image.ImageObserver
  ABORT, ALLBITS, ERROR, FRAMEBITS, HEIGHT, PROPERTIES, SOMEBITS, WIDTH

Constructor Summary

Constructors
Constructor and Description

Container()
Constructs a new Container.

Constructors
Constructor and Description
`Container()` Constructs a new Container.

Method Summary

Methods
Modifier and Type	Method and Description
`Component`	`add(Component comp)` Appends the specified component to the end of this container.
`Component`	`add(Component comp, int index)` Adds the specified component to this container at the given position.
`void`	`add(Component comp, Object constraints)` Adds the specified component to the end of this container.
`void`	`add(Component comp, Object constraints, int index)` Adds the specified component to this container with the specified constraints at the specified index.
`Component`	`add(String name, Component comp)` Adds the specified component to this container.
`void`	`addContainerListener(ContainerListener l)` Adds the specified container listener to receive container events from this container.
`protected void`	`addImpl(Component comp, Object constraints, int index)` Adds the specified component to this container at the specified index.
`void`	`addNotify()` Makes this Container displayable by connecting it to a native screen resource.
`void`	`addPropertyChangeListener(PropertyChangeListener listener)` Adds a PropertyChangeListener to the listener list.
`void`	`addPropertyChangeListener(String propertyName, PropertyChangeListener listener)` Adds a PropertyChangeListener to the listener list for a specific property.
`void`	`applyComponentOrientation(ComponentOrientation o)` Sets the `ComponentOrientation` property of this container and all components contained within it.
`boolean`	`areFocusTraversalKeysSet(int id)` Returns whether the Set of focus traversal keys for the given focus traversal operation has been explicitly defined for this Container.
`int`	`countComponents()` Deprecated. As of JDK version 1.1, replaced by getComponentCount().
`void`	`deliverEvent(Event e)` Deprecated. As of JDK version 1.1, replaced by `dispatchEvent(AWTEvent e)`
`void`	`doLayout()` Causes this container to lay out its components.
`Component`	`findComponentAt(int x, int y)` Locates the visible child component that contains the specified position.
`Component`	`findComponentAt(Point p)` Locates the visible child component that contains the specified point.
`float`	`getAlignmentX()` Returns the alignment along the x axis.
`float`	`getAlignmentY()` Returns the alignment along the y axis.
`Component`	`getComponent(int n)` Gets the nth component in this container.
`Component`	`getComponentAt(int x, int y)` Locates the component that contains the x,y position.
`Component`	`getComponentAt(Point p)` Gets the component that contains the specified point.
`int`	`getComponentCount()` Gets the number of components in this panel.
`Component[]`	`getComponents()` Gets all the components in this container.
`int`	`getComponentZOrder(Component comp)` Returns the z-order index of the component inside the container.
`ContainerListener[]`	`getContainerListeners()` Returns an array of all the container listeners registered on this container.
`Set<AWTKeyStroke>`	`getFocusTraversalKeys(int id)` Returns the Set of focus traversal keys for a given traversal operation for this Container.
`FocusTraversalPolicy`	`getFocusTraversalPolicy()` Returns the focus traversal policy that will manage keyboard traversal of this Container's children, or null if this Container is not a focus cycle root.
`Insets`	`getInsets()` Determines the insets of this container, which indicate the size of the container's border.
`LayoutManager`	`getLayout()` Gets the layout manager for this container.
`<T extends EventListener> T[]`	`getListeners(Class<T> listenerType)` Returns an array of all the objects currently registered as `FooListener`s upon this `Container`.
`Dimension`	`getMaximumSize()` Returns the maximum size of this container.
`Dimension`	`getMinimumSize()` Returns the minimum size of this container.
`Point`	`getMousePosition(boolean allowChildren)` Returns the position of the mouse pointer in this `Container`'s coordinate space if the `Container` is under the mouse pointer, otherwise returns `null`.
`Dimension`	`getPreferredSize()` Returns the preferred size of this container.
`Insets`	`insets()` Deprecated. As of JDK version 1.1, replaced by `getInsets()`.
`void`	`invalidate()` Invalidates the container.
`boolean`	`isAncestorOf(Component c)` Checks if the component is contained in the component hierarchy of this container.
`boolean`	`isFocusCycleRoot()` Returns whether this Container is the root of a focus traversal cycle.
`boolean`	`isFocusCycleRoot(Container container)` Returns whether the specified Container is the focus cycle root of this Container's focus traversal cycle.
`boolean`	`isFocusTraversalPolicyProvider()` Returns whether this container provides focus traversal policy.
`boolean`	`isFocusTraversalPolicySet()` Returns whether the focus traversal policy has been explicitly set for this Container.
`boolean`	`isValidateRoot()` Indicates if this container is a validate root.
`void`	`layout()` Deprecated. As of JDK version 1.1, replaced by `doLayout()`.
`void`	`list(PrintStream out, int indent)` Prints a listing of this container to the specified output stream.
`void`	`list(PrintWriter out, int indent)` Prints out a list, starting at the specified indentation, to the specified print writer.
`Component`	`locate(int x, int y)` Deprecated. As of JDK version 1.1, replaced by `getComponentAt(int, int)`.
`Dimension`	`minimumSize()` Deprecated. As of JDK version 1.1, replaced by `getMinimumSize()`.
`void`	`paint(Graphics g)` Paints the container.
`void`	`paintComponents(Graphics g)` Paints each of the components in this container.
`protected String`	`paramString()` Returns a string representing the state of this `Container`.
`Dimension`	`preferredSize()` Deprecated. As of JDK version 1.1, replaced by `getPreferredSize()`.
`void`	`print(Graphics g)` Prints the container.
`void`	`printComponents(Graphics g)` Prints each of the components in this container.
`protected void`	`processContainerEvent(ContainerEvent e)` Processes container events occurring on this container by dispatching them to any registered ContainerListener objects.
`protected void`	`processEvent(AWTEvent e)` Processes events on this container.
`void`	`remove(Component comp)` Removes the specified component from this container.
`void`	`remove(int index)` Removes the component, specified by `index`, from this container.
`void`	`removeAll()` Removes all the components from this container.
`void`	`removeContainerListener(ContainerListener l)` Removes the specified container listener so it no longer receives container events from this container.
`void`	`removeNotify()` Makes this Container undisplayable by removing its connection to its native screen resource.
`void`	`setComponentZOrder(Component comp, int index)` Moves the specified component to the specified z-order index in the container.
`void`	`setFocusCycleRoot(boolean focusCycleRoot)` Sets whether this Container is the root of a focus traversal cycle.
`void`	`setFocusTraversalKeys(int id, Set<? extends AWTKeyStroke> keystrokes)` Sets the focus traversal keys for a given traversal operation for this Container.
`void`	`setFocusTraversalPolicy(FocusTraversalPolicy policy)` Sets the focus traversal policy that will manage keyboard traversal of this Container's children, if this Container is a focus cycle root.
`void`	`setFocusTraversalPolicyProvider(boolean provider)` Sets whether this container will be used to provide focus traversal policy.
`void`	`setFont(Font f)` Sets the font of this container.
`void`	`setLayout(LayoutManager mgr)` Sets the layout manager for this container.
`void`	`transferFocusDownCycle()` Transfers the focus down one focus traversal cycle.
`void`	`update(Graphics g)` Updates the container.
`void`	`validate()` Validates this container and all of its subcomponents.
`protected void`	`validateTree()` Recursively descends the container tree and recomputes the layout for any subtrees marked as needing it (those marked as invalid).

Methods inherited from class java.awt.Component
action, add, addComponentListener, addFocusListener, addHierarchyBoundsListener, addHierarchyListener, addInputMethodListener, addKeyListener, addMouseListener, addMouseMotionListener, addMouseWheelListener, bounds, checkImage, checkImage, coalesceEvents, contains, contains, createImage, createImage, createVolatileImage, createVolatileImage, disable, disableEvents, dispatchEvent, enable, enable, enableEvents, enableInputMethods, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, getAccessibleContext, getBackground, getBaseline, getBaselineResizeBehavior, getBounds, getBounds, getColorModel, getComponentListeners, getComponentOrientation, getCursor, getDropTarget, getFocusCycleRootAncestor, getFocusListeners, getFocusTraversalKeysEnabled, getFont, getFontMetrics, getForeground, getGraphics, getGraphicsConfiguration, getHeight, getHierarchyBoundsListeners, getHierarchyListeners, getIgnoreRepaint, getInputContext, getInputMethodListeners, getInputMethodRequests, getKeyListeners, getLocale, getLocation, getLocation, getLocationOnScreen, getMouseListeners, getMouseMotionListeners, getMousePosition, getMouseWheelListeners, getName, getParent, getPeer, getPropertyChangeListeners, getPropertyChangeListeners, getSize, getSize, getToolkit, getTreeLock, getWidth, getX, getY, gotFocus, handleEvent, hasFocus, hide, imageUpdate, inside, isBackgroundSet, isCursorSet, isDisplayable, isDoubleBuffered, isEnabled, isFocusable, isFocusOwner, isFocusTraversable, isFontSet, isForegroundSet, isLightweight, isMaximumSizeSet, isMinimumSizeSet, isOpaque, isPreferredSizeSet, isShowing, isValid, isVisible, keyDown, keyUp, list, list, list, location, lostFocus, mouseDown, mouseDrag, mouseEnter, mouseExit, mouseMove, mouseUp, move, nextFocus, paintAll, postEvent, prepareImage, prepareImage, printAll, processComponentEvent, processFocusEvent, processHierarchyBoundsEvent, processHierarchyEvent, processInputMethodEvent, processKeyEvent, processMouseEvent, processMouseMotionEvent, processMouseWheelEvent, remove, removeComponentListener, removeFocusListener, removeHierarchyBoundsListener, removeHierarchyListener, removeInputMethodListener, removeKeyListener, removeMouseListener, removeMouseMotionListener, removeMouseWheelListener, removePropertyChangeListener, removePropertyChangeListener, repaint, repaint, repaint, repaint, requestFocus, requestFocus, requestFocusInWindow, requestFocusInWindow, reshape, resize, resize, setBackground, setBounds, setBounds, setComponentOrientation, setCursor, setDropTarget, setEnabled, setFocusable, setFocusTraversalKeysEnabled, setForeground, setIgnoreRepaint, setLocale, setLocation, setLocation, setMaximumSize, setMinimumSize, setName, setPreferredSize, setSize, setSize, setVisible, show, show, size, toString, transferFocus, transferFocusBackward, transferFocusUpCycle

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Constructor Detail
- Container
```
public Container()
```
  Constructs a new Container. Containers can be extended directly, but are lightweight in this case and must be contained by a parent somewhere higher up in the component tree that is native. (such as Frame for example).

Method Detail

getComponentCount
```
public int getComponentCount()
```
Gets the number of components in this panel.
Note: This method should be called under AWT tree lock.

Returns:
the number of components in this panel.
Since:

JDK1.1

See Also:
getComponent(int), Component.getTreeLock()

countComponents
```
@Deprecated
public int countComponents()
```
Deprecated. As of JDK version 1.1, replaced by getComponentCount().

getComponent
```
public Component getComponent(int n)
```
Gets the nth component in this container.
Note: This method should be called under AWT tree lock.

Parameters:
n - the index of the component to get.

Returns:
the n^th component in this container.

Throws:

ArrayIndexOutOfBoundsException - if the n^th value does not exist.
See Also:
Component.getTreeLock()

getComponents
```
public Component[] getComponents()
```
Gets all the components in this container.
Note: This method should be called under AWT tree lock.

Returns:
an array of all the components in this container.
See Also:
Component.getTreeLock()

getInsets
```
public Insets getInsets()
```
Determines the insets of this container, which indicate the size of the container's border.
A Frame object, for example, has a top inset that corresponds to the height of the frame's title bar.

Returns:
the insets of this container.
Since:

JDK1.1

See Also:
Insets, LayoutManager

insets
```
@Deprecated
public Insets insets()
```
Deprecated. As of JDK version 1.1, replaced by getInsets().

add
```
public Component add(Component comp)
```
Appends the specified component to the end of this container. This is a convenience method for addImpl(java.awt.Component, java.lang.Object, int).
This method changes layout-related information, and therefore, invalidates the component hierarchy. If the container has already been displayed, the hierarchy must be validated thereafter in order to display the added component.

Parameters:
comp - the component to be added

Returns:
the component argument

Throws:

NullPointerException - if comp is null
See Also:
addImpl(java.awt.Component, java.lang.Object, int), invalidate(), validate(), JComponent.revalidate()

add
```
public Component add(String name,
            Component comp)
```
Adds the specified component to this container. This is a convenience method for addImpl(java.awt.Component, java.lang.Object, int).
This method is obsolete as of 1.1. Please use the method add(Component, Object) instead.
This method changes layout-related information, and therefore, invalidates the component hierarchy. If the container has already been displayed, the hierarchy must be validated thereafter in order to display the added component.

Throws:

NullPointerException - if comp is null
See Also:
add(Component, Object), invalidate()

add
```
public Component add(Component comp,
            int index)
```
Adds the specified component to this container at the given position. This is a convenience method for addImpl(java.awt.Component, java.lang.Object, int).
This method changes layout-related information, and therefore, invalidates the component hierarchy. If the container has already been displayed, the hierarchy must be validated thereafter in order to display the added component.

Parameters:
comp - the component to be added
index - the position at which to insert the component, or -1 to append the component to the end

Returns:
the component comp

Throws:

NullPointerException - if comp is null

IllegalArgumentException - if index is invalid (see addImpl(java.awt.Component, java.lang.Object, int) for details)
See Also:
addImpl(java.awt.Component, java.lang.Object, int), remove(int), invalidate(), validate(), JComponent.revalidate()

setComponentZOrder
```
public void setComponentZOrder(Component comp,
                      int index)
```
Moves the specified component to the specified z-order index in the container. The z-order determines the order that components are painted; the component with the highest z-order paints first and the component with the lowest z-order paints last. Where components overlap, the component with the lower z-order paints over the component with the higher z-order.
If the component is a child of some other container, it is removed from that container before being added to this container. The important difference between this method and java.awt.Container.add(Component, int) is that this method doesn't call removeNotify on the component while removing it from its previous container unless necessary and when allowed by the underlying native windowing system. This way, if the component has the keyboard focus, it maintains the focus when moved to the new position.
This property is guaranteed to apply only to lightweight non-Container components.
This method changes layout-related information, and therefore, invalidates the component hierarchy.
Note: Not all platforms support changing the z-order of heavyweight components from one container into another without the call to removeNotify. There is no way to detect whether a platform supports this, so developers shouldn't make any assumptions.

Parameters:
comp - the component to be moved
index - the position in the container's list to insert the component, where getComponentCount() appends to the end

Throws:

NullPointerException - if comp is null

IllegalArgumentException - if comp is one of the container's parents

IllegalArgumentException - if index is not in the range [0, getComponentCount()] for moving between containers, or not in the range [0, getComponentCount()-1] for moving inside a container

IllegalArgumentException - if adding a container to itself

IllegalArgumentException - if adding a Window to a container
Since:

1.5

See Also:
getComponentZOrder(java.awt.Component), invalidate()

getComponentZOrder
```
public int getComponentZOrder(Component comp)
```
Returns the z-order index of the component inside the container. The higher a component is in the z-order hierarchy, the lower its index. The component with the lowest z-order index is painted last, above all other child components.

Parameters:
comp - the component being queried

Returns:
the z-order index of the component; otherwise returns -1 if the component is null or doesn't belong to the container
Since:

1.5

See Also:
setComponentZOrder(java.awt.Component, int)

add
```
public void add(Component comp,
       Object constraints)
```
Adds the specified component to the end of this container. Also notifies the layout manager to add the component to this container's layout using the specified constraints object. This is a convenience method for addImpl(java.awt.Component, java.lang.Object, int).
This method changes layout-related information, and therefore, invalidates the component hierarchy. If the container has already been displayed, the hierarchy must be validated thereafter in order to display the added component.

Parameters:
comp - the component to be added
constraints - an object expressing layout contraints for this component

Throws:

NullPointerException - if comp is null
Since:

JDK1.1

See Also:
addImpl(java.awt.Component, java.lang.Object, int), invalidate(), validate(), JComponent.revalidate(), LayoutManager

add
```
public void add(Component comp,
       Object constraints,
       int index)
```
Adds the specified component to this container with the specified constraints at the specified index. Also notifies the layout manager to add the component to the this container's layout using the specified constraints object. This is a convenience method for addImpl(java.awt.Component, java.lang.Object, int).
This method changes layout-related information, and therefore, invalidates the component hierarchy. If the container has already been displayed, the hierarchy must be validated thereafter in order to display the added component.

Parameters:
comp - the component to be added
constraints - an object expressing layout contraints for this
index - the position in the container's list at which to insert the component; -1 means insert at the end component

Throws:

NullPointerException - if comp is null

IllegalArgumentException - if index is invalid (see addImpl(java.awt.Component, java.lang.Object, int) for details)
See Also:
addImpl(java.awt.Component, java.lang.Object, int), invalidate(), validate(), JComponent.revalidate(), remove(int), LayoutManager

addImpl
```
protected void addImpl(Component comp,
           Object constraints,
           int index)
```
Adds the specified component to this container at the specified index. This method also notifies the layout manager to add the component to this container's layout using the specified constraints object via the addLayoutComponent method.
The constraints are defined by the particular layout manager being used. For example, the BorderLayout class defines five constraints: BorderLayout.NORTH, BorderLayout.SOUTH, BorderLayout.EAST, BorderLayout.WEST, and BorderLayout.CENTER.
The GridBagLayout class requires a GridBagConstraints object. Failure to pass the correct type of constraints object results in an IllegalArgumentException.
If the current layout manager implements LayoutManager2, then LayoutManager2.addLayoutComponent(Component,Object) is invoked on it. If the current layout manager does not implement LayoutManager2, and constraints is a String, then LayoutManager.addLayoutComponent(String,Component) is invoked on it.
If the component is not an ancestor of this container and has a non-null parent, it is removed from its current parent before it is added to this container.
This is the method to override if a program needs to track every add request to a container as all other add methods defer to this one. An overriding method should usually include a call to the superclass's version of the method:

super.addImpl(comp, constraints, index)

This method changes layout-related information, and therefore, invalidates the component hierarchy. If the container has already been displayed, the hierarchy must be validated thereafter in order to display the added component.

Parameters:
comp - the component to be added
constraints - an object expressing layout constraints for this component
index - the position in the container's list at which to insert the component, where -1 means append to the end

Throws:

IllegalArgumentException - if index is invalid; if comp is a child of this container, the valid range is [-1, getComponentCount()-1]; if component is not a child of this container, the valid range is [-1, getComponentCount()]

IllegalArgumentException - if comp is an ancestor of this container

IllegalArgumentException - if adding a window to a container

NullPointerException - if comp is null
Since:

JDK1.1

See Also:
add(Component), add(Component, int), add(Component, java.lang.Object), invalidate(), LayoutManager, LayoutManager2

remove
```
public void remove(int index)
```
Removes the component, specified by index, from this container. This method also notifies the layout manager to remove the component from this container's layout via the removeLayoutComponent method.
This method changes layout-related information, and therefore, invalidates the component hierarchy. If the container has already been displayed, the hierarchy must be validated thereafter in order to reflect the changes.

Parameters:
index - the index of the component to be removed

Throws:

ArrayIndexOutOfBoundsException - if index is not in range [0, getComponentCount()-1]
Since:

JDK1.1

See Also:
add(java.awt.Component), invalidate(), validate(), getComponentCount()

remove
```
public void remove(Component comp)
```
Removes the specified component from this container. This method also notifies the layout manager to remove the component from this container's layout via the removeLayoutComponent method.
This method changes layout-related information, and therefore, invalidates the component hierarchy. If the container has already been displayed, the hierarchy must be validated thereafter in order to reflect the changes.

Parameters:
comp - the component to be removed

Throws:

NullPointerException - if comp is null
See Also:
add(java.awt.Component), invalidate(), validate(), remove(int)

removeAll
```
public void removeAll()
```
Removes all the components from this container. This method also notifies the layout manager to remove the components from this container's layout via the removeLayoutComponent method.
This method changes layout-related information, and therefore, invalidates the component hierarchy. If the container has already been displayed, the hierarchy must be validated thereafter in order to reflect the changes.

See Also:
add(java.awt.Component), remove(int), invalidate()

getLayout
```
public LayoutManager getLayout()
```
Gets the layout manager for this container.

See Also:
doLayout(), setLayout(java.awt.LayoutManager)

setLayout
```
public void setLayout(LayoutManager mgr)
```
Sets the layout manager for this container.
This method changes layout-related information, and therefore, invalidates the component hierarchy.

Parameters:
mgr - the specified layout manager
See Also:
doLayout(), getLayout(), invalidate()

doLayout
```
public void doLayout()
```
Causes this container to lay out its components. Most programs should not call this method directly, but should invoke the validate method instead.

Overrides:

doLayout in class Component

Since:

JDK1.1

See Also:
LayoutManager.layoutContainer(java.awt.Container), setLayout(java.awt.LayoutManager), validate()

layout
```
@Deprecated
public void layout()
```
Deprecated. As of JDK version 1.1, replaced by doLayout().

Overrides:

layout in class Component

isValidateRoot
```
public boolean isValidateRoot()
```
Indicates if this container is a validate root.
Layout-related changes, such as bounds of the validate root descendants, do not affect the layout of the validate root parent. This peculiarity enables the invalidate() method to stop invalidating the component hierarchy when the method encounters a validate root.
If a component hierarchy contains validate roots, the validate() method must be invoked on the validate root of a previously invalidated component, rather than on the top-level container (such as a Frame object) to restore the validity of the hierarchy later.
The Window class and the Applet class are the validate roots in AWT. Swing introduces more validate roots.

Returns:
whether this container is a validate root
Since:

1.7

See Also:
invalidate(), Component.invalidate(), JComponent.isValidateRoot(), JComponent.revalidate()

invalidate
```
public void invalidate()
```
Invalidates the container.
If the LayoutManager installed on this container is an instance of the LayoutManager2 interface, then the LayoutManager2.invalidateLayout(Container) method is invoked on it supplying this Container as the argument.
Afterwards this method marks this container invalid, and invalidates its ancestors. See the Component.invalidate() method for more details.

Overrides:

invalidate in class Component

See Also:
validate(), layout(), LayoutManager2

validate
```
public void validate()
```
Validates this container and all of its subcomponents.
Validating a container means laying out its subcomponents. Layout-related changes, such as setting the bounds of a component, or adding a component to the container, invalidate the container automatically. Note that the ancestors of the container may be invalidated also (see Component.invalidate() for details.) Therefore, to restore the validity of the hierarchy, the validate() method should be invoked on a validate root of an invalidated component, or on the top-most container if the hierarchy does not contain validate roots.
Validating the container may be a quite time-consuming operation. For performance reasons a developer may postpone the validation of the hierarchy till a set of layout-related operations completes, e.g. after adding all the children to the container.
If this Container is not valid, this method invokes the validateTree method and marks this Container as valid. Otherwise, no action is performed.

Overrides:

validate in class Component

See Also:
add(java.awt.Component), invalidate(), isValidateRoot(), JComponent.revalidate(), validateTree()

validateTree
```
protected void validateTree()
```
Recursively descends the container tree and recomputes the layout for any subtrees marked as needing it (those marked as invalid). Synchronization should be provided by the method that calls this one: validate.

See Also:
doLayout(), validate()

setFont
```
public void setFont(Font f)
```
Sets the font of this container.
This method changes layout-related information, and therefore, invalidates the component hierarchy.

Overrides:

setFont in class Component

Parameters:
f - The font to become this container's font.
Since:

JDK1.0

See Also:
Component.getFont(), invalidate()

getPreferredSize
```
public Dimension getPreferredSize()
```
Returns the preferred size of this container. If the preferred size has not been set explicitly by Component.setPreferredSize(Dimension) and this Container has a non-null LayoutManager, then LayoutManager.preferredLayoutSize(Container) is used to calculate the preferred size.
Note: some implementations may cache the value returned from the LayoutManager. Implementations that cache need not invoke preferredLayoutSize on the LayoutManager every time this method is invoked, rather the LayoutManager will only be queried after the Container becomes invalid.

Overrides:

getPreferredSize in class Component

Returns:
an instance of Dimension that represents the preferred size of this container.
See Also:
getMinimumSize(), getMaximumSize(), getLayout(), LayoutManager.preferredLayoutSize(Container), Component.getPreferredSize()

preferredSize
```
@Deprecated
public Dimension preferredSize()
```
Deprecated. As of JDK version 1.1, replaced by getPreferredSize().

Overrides:

preferredSize in class Component

getMinimumSize
```
public Dimension getMinimumSize()
```
Returns the minimum size of this container. If the minimum size has not been set explicitly by Component.setMinimumSize(Dimension) and this Container has a non-null LayoutManager, then LayoutManager.minimumLayoutSize(Container) is used to calculate the minimum size.
Note: some implementations may cache the value returned from the LayoutManager. Implementations that cache need not invoke minimumLayoutSize on the LayoutManager every time this method is invoked, rather the LayoutManager will only be queried after the Container becomes invalid.

Overrides:

getMinimumSize in class Component

Returns:
an instance of Dimension that represents the minimum size of this container.
Since:

JDK1.1

See Also:
getPreferredSize(), getMaximumSize(), getLayout(), LayoutManager.minimumLayoutSize(Container), Component.getMinimumSize()

minimumSize
```
@Deprecated
public Dimension minimumSize()
```
Deprecated. As of JDK version 1.1, replaced by getMinimumSize().

Overrides:

minimumSize in class Component

getMaximumSize
```
public Dimension getMaximumSize()
```
Returns the maximum size of this container. If the maximum size has not been set explicitly by Component.setMaximumSize(Dimension) and the LayoutManager installed on this Container is an instance of LayoutManager2, then LayoutManager2.maximumLayoutSize(Container) is used to calculate the maximum size.
Note: some implementations may cache the value returned from the LayoutManager2. Implementations that cache need not invoke maximumLayoutSize on the LayoutManager2 every time this method is invoked, rather the LayoutManager2 will only be queried after the Container becomes invalid.

Overrides:

getMaximumSize in class Component

Returns:
an instance of Dimension that represents the maximum size of this container.
See Also:
getPreferredSize(), getMinimumSize(), getLayout(), LayoutManager2.maximumLayoutSize(Container), Component.getMaximumSize()

getAlignmentX
```
public float getAlignmentX()
```
Returns the alignment along the x axis. This specifies how the component would like to be aligned relative to other components. The value should be a number between 0 and 1 where 0 represents alignment along the origin, 1 is aligned the furthest away from the origin, 0.5 is centered, etc.

Overrides:

getAlignmentX in class Component

getAlignmentY
```
public float getAlignmentY()
```
Returns the alignment along the y axis. This specifies how the component would like to be aligned relative to other components. The value should be a number between 0 and 1 where 0 represents alignment along the origin, 1 is aligned the furthest away from the origin, 0.5 is centered, etc.

Overrides:

getAlignmentY in class Component

paint
```
public void paint(Graphics g)
```
Paints the container. This forwards the paint to any lightweight components that are children of this container. If this method is reimplemented, super.paint(g) should be called so that lightweight components are properly rendered. If a child component is entirely clipped by the current clipping setting in g, paint() will not be forwarded to that child.

Overrides:

paint in class Component

Parameters:
g - the specified Graphics window
See Also:
Component.update(Graphics)

update
```
public void update(Graphics g)
```
Updates the container. This forwards the update to any lightweight components that are children of this container. If this method is reimplemented, super.update(g) should be called so that lightweight components are properly rendered. If a child component is entirely clipped by the current clipping setting in g, update() will not be forwarded to that child.

Overrides:

update in class Component

Parameters:
g - the specified Graphics window
See Also:
Component.update(Graphics)

print
```
public void print(Graphics g)
```
Prints the container. This forwards the print to any lightweight components that are children of this container. If this method is reimplemented, super.print(g) should be called so that lightweight components are properly rendered. If a child component is entirely clipped by the current clipping setting in g, print() will not be forwarded to that child.

Overrides:

print in class Component

Parameters:
g - the specified Graphics window
See Also:
Component.update(Graphics)

paintComponents
```
public void paintComponents(Graphics g)
```
Paints each of the components in this container.

Parameters:
g - the graphics context.
See Also:
Component.paint(java.awt.Graphics), Component.paintAll(java.awt.Graphics)

printComponents
```
public void printComponents(Graphics g)
```
Prints each of the components in this container.

Parameters:
g - the graphics context.
See Also:
Component.print(java.awt.Graphics), Component.printAll(java.awt.Graphics)

addContainerListener
```
public void addContainerListener(ContainerListener l)
```
Adds the specified container listener to receive container events from this container. If l is null, no exception is thrown and no action is performed.
Refer to AWT Threading Issues for details on AWT's threading model.

Parameters:
l - the container listener
See Also:
removeContainerListener(java.awt.event.ContainerListener), getContainerListeners()

removeContainerListener
```
public void removeContainerListener(ContainerListener l)
```
Removes the specified container listener so it no longer receives container events from this container. If l is null, no exception is thrown and no action is performed.
Refer to AWT Threading Issues for details on AWT's threading model.

Parameters:
l - the container listener
See Also:
addContainerListener(java.awt.event.ContainerListener), getContainerListeners()

getContainerListeners
```
public ContainerListener[] getContainerListeners()
```
Returns an array of all the container listeners registered on this container.

Returns:
all of this container's ContainerListeners or an empty array if no container listeners are currently registered
Since:

1.4

See Also:
addContainerListener(java.awt.event.ContainerListener), removeContainerListener(java.awt.event.ContainerListener)

getListeners
```
public <T extends EventListener> T[] getListeners(Class<T> listenerType)
```
Returns an array of all the objects currently registered as FooListeners upon this Container. FooListeners are registered using the addFooListener method.
You can specify the listenerType argument with a class literal, such as FooListener.class. For example, you can query a Container c for its container listeners with the following code:
```
ContainerListener[] cls = (ContainerListener[])(c.getListeners(ContainerListener.class));
```
If no such listeners exist, this method returns an empty array.
Overrides:

getListeners in class Component

Parameters:
listenerType - the type of listeners requested; this parameter should specify an interface that descends from java.util.EventListener

Returns:
an array of all objects registered as FooListeners on this container, or an empty array if no such listeners have been added

Throws:

ClassCastException - if listenerType doesn't specify a class or interface that implements java.util.EventListener

NullPointerException - if listenerType is null
Since:

1.3

See Also:
getContainerListeners()

processEvent
```
protected void processEvent(AWTEvent e)
```
Processes events on this container. If the event is a ContainerEvent, it invokes the processContainerEvent method, else it invokes its superclass's processEvent.
Note that if the event parameter is null the behavior is unspecified and may result in an exception.

Overrides:

processEvent in class Component

Parameters:
e - the event
See Also:
Component.processComponentEvent(java.awt.event.ComponentEvent), Component.processFocusEvent(java.awt.event.FocusEvent), Component.processKeyEvent(java.awt.event.KeyEvent), Component.processMouseEvent(java.awt.event.MouseEvent), Component.processMouseMotionEvent(java.awt.event.MouseEvent), Component.processInputMethodEvent(java.awt.event.InputMethodEvent), Component.processHierarchyEvent(java.awt.event.HierarchyEvent), Component.processMouseWheelEvent(java.awt.event.MouseWheelEvent)

processContainerEvent
```
protected void processContainerEvent(ContainerEvent e)
```
Processes container events occurring on this container by dispatching them to any registered ContainerListener objects. NOTE: This method will not be called unless container events are enabled for this component; this happens when one of the following occurs:
- A ContainerListener object is registered via addContainerListener
- Container events are enabled via enableEvents
Note that if the event parameter is null the behavior is unspecified and may result in an exception.
Parameters:
e - the container event
See Also:
Component.enableEvents(long)

deliverEvent
```
@Deprecated
public void deliverEvent(Event e)
```
Deprecated. As of JDK version 1.1, replaced by dispatchEvent(AWTEvent e)

Overrides:

deliverEvent in class Component

getComponentAt
```
public Component getComponentAt(int x,
                       int y)
```
Locates the component that contains the x,y position. The top-most child component is returned in the case where there is overlap in the components. This is determined by finding the component closest to the index 0 that claims to contain the given point via Component.contains(), except that Components which have native peers take precedence over those which do not (i.e., lightweight Components).

Overrides:

getComponentAt in class Component

Parameters:
x - the x coordinate
y - the y coordinate

Returns:
null if the component does not contain the position. If there is no child component at the requested point and the point is within the bounds of the container the container itself is returned; otherwise the top-most child is returned.
Since:

JDK1.1

See Also:
Component.contains(int, int)

locate
```
@Deprecated
public Component locate(int x,
                          int y)
```
Deprecated. As of JDK version 1.1, replaced by getComponentAt(int, int).

Overrides:

locate in class Component

getComponentAt
```
public Component getComponentAt(Point p)
```
Gets the component that contains the specified point.

Overrides:

getComponentAt in class Component

Parameters:
p - the point.

Returns:
returns the component that contains the point, or null if the component does not contain the point.
Since:

JDK1.1

See Also:
Component.contains(int, int)

getMousePosition
```
public Point getMousePosition(boolean allowChildren)
                       throws HeadlessException
```
Returns the position of the mouse pointer in this Container's coordinate space if the Container is under the mouse pointer, otherwise returns null. This method is similar to Component.getMousePosition() with the exception that it can take the Container's children into account. If allowChildren is false, this method will return a non-null value only if the mouse pointer is above the Container directly, not above the part obscured by children. If allowChildren is true, this method returns a non-null value if the mouse pointer is above Container or any of its descendants.

Parameters:
allowChildren - true if children should be taken into account

Returns:
mouse coordinates relative to this Component, or null

Throws:

HeadlessException - if GraphicsEnvironment.isHeadless() returns true
Since:

1.5

See Also:
Component.getMousePosition()

findComponentAt
```
public Component findComponentAt(int x,
                        int y)
```
Locates the visible child component that contains the specified position. The top-most child component is returned in the case where there is overlap in the components. If the containing child component is a Container, this method will continue searching for the deepest nested child component. Components which are not visible are ignored during the search.
The findComponentAt method is different from getComponentAt in that getComponentAt only searches the Container's immediate children; if the containing component is a Container, findComponentAt will search that child to find a nested component.

Parameters:
x - the x coordinate
y - the y coordinate

Returns:
null if the component does not contain the position. If there is no child component at the requested point and the point is within the bounds of the container the container itself is returned.
Since:

1.2

See Also:
Component.contains(int, int), getComponentAt(int, int)

findComponentAt
```
public Component findComponentAt(Point p)
```
Locates the visible child component that contains the specified point. The top-most child component is returned in the case where there is overlap in the components. If the containing child component is a Container, this method will continue searching for the deepest nested child component. Components which are not visible are ignored during the search.
The findComponentAt method is different from getComponentAt in that getComponentAt only searches the Container's immediate children; if the containing component is a Container, findComponentAt will search that child to find a nested component.

Parameters:
p - the point.

Returns:
null if the component does not contain the position. If there is no child component at the requested point and the point is within the bounds of the container the container itself is returned.

Throws:

NullPointerException - if p is null
Since:

1.2

See Also:
Component.contains(int, int), getComponentAt(int, int)

addNotify
```
public void addNotify()
```
Makes this Container displayable by connecting it to a native screen resource. Making a container displayable will cause all of its children to be made displayable. This method is called internally by the toolkit and should not be called directly by programs.

Overrides:

addNotify in class Component

See Also:
Component.isDisplayable(), removeNotify()

removeNotify
```
public void removeNotify()
```
Makes this Container undisplayable by removing its connection to its native screen resource. Making a container undisplayable will cause all of its children to be made undisplayable. This method is called by the toolkit internally and should not be called directly by programs.

Overrides:

removeNotify in class Component

See Also:
Component.isDisplayable(), addNotify()

isAncestorOf
```
public boolean isAncestorOf(Component c)
```
Checks if the component is contained in the component hierarchy of this container.

Parameters:
c - the component

Returns:
true if it is an ancestor; false otherwise.
Since:

JDK1.1

paramString
```
protected String paramString()
```
Returns a string representing the state of this Container. This method is intended to be used only for debugging purposes, and the content and format of the returned string may vary between implementations. The returned string may be empty but may not be null.

Overrides:

paramString in class Component

Returns:
the parameter string of this container

list
```
public void list(PrintStream out,
        int indent)
```
Prints a listing of this container to the specified output stream. The listing starts at the specified indentation.
The immediate children of the container are printed with an indentation of indent+1. The children of those children are printed at indent+2 and so on.

Overrides:

list in class Component

Parameters:
out - a print stream
indent - the number of spaces to indent

Throws:

NullPointerException - if out is null
Since:

JDK1.0

See Also:
Component.list(java.io.PrintStream, int)

list
```
public void list(PrintWriter out,
        int indent)
```
Prints out a list, starting at the specified indentation, to the specified print writer.
The immediate children of the container are printed with an indentation of indent+1. The children of those children are printed at indent+2 and so on.

Overrides:

list in class Component

Parameters:
out - a print writer
indent - the number of spaces to indent

Throws:

NullPointerException - if out is null
Since:

JDK1.1

See Also:
Component.list(java.io.PrintWriter, int)

setFocusTraversalKeys

public void setFocusTraversalKeys(int id,
                         Set<? extends AWTKeyStroke> keystrokes)

Sets the focus traversal keys for a given traversal operation for this Container.

The default values for a Container's focus traversal keys are implementation-dependent. Sun recommends that all implementations for a particular native platform use the same default values. The recommendations for Windows and Unix are listed below. These recommendations are used in the Sun AWT implementations.

Identifier	Meaning	Default
KeyboardFocusManager.FORWARD_TRAVERSAL_KEYS	Normal forward keyboard traversal	TAB on KEY_PRESSED, CTRL-TAB on KEY_PRESSED
KeyboardFocusManager.BACKWARD_TRAVERSAL_KEYS	Normal reverse keyboard traversal	SHIFT-TAB on KEY_PRESSED, CTRL-SHIFT-TAB on KEY_PRESSED
KeyboardFocusManager.UP_CYCLE_TRAVERSAL_KEYS	Go up one focus traversal cycle	none
KeyboardFocusManager.DOWN_CYCLE_TRAVERSAL_KEYS		Go down one focus traversal cycle	none

To disable a traversal key, use an empty Set; Collections.EMPTY_SET is recommended.

Using the AWTKeyStroke API, client code can specify on which of two specific KeyEvents, KEY_PRESSED or KEY_RELEASED, the focus traversal operation will occur. Regardless of which KeyEvent is specified, however, all KeyEvents related to the focus traversal key, including the associated KEY_TYPED event, will be consumed, and will not be dispatched to any Container. It is a runtime error to specify a KEY_TYPED event as mapping to a focus traversal operation, or to map the same event to multiple default focus traversal operations.

If a value of null is specified for the Set, this Container inherits the Set from its parent. If all ancestors of this Container have null specified for the Set, then the current KeyboardFocusManager's default Set is used.

Overrides:: setFocusTraversalKeys in class Component
Parameters:: id - one of KeyboardFocusManager.FORWARD_TRAVERSAL_KEYS, KeyboardFocusManager.BACKWARD_TRAVERSAL_KEYS, KeyboardFocusManager.UP_CYCLE_TRAVERSAL_KEYS, or KeyboardFocusManager.DOWN_CYCLE_TRAVERSAL_KEYS; keystrokes - the Set of AWTKeyStroke for the specified operation
Throws:: IllegalArgumentException - if id is not one of KeyboardFocusManager.FORWARD_TRAVERSAL_KEYS, KeyboardFocusManager.BACKWARD_TRAVERSAL_KEYS, KeyboardFocusManager.UP_CYCLE_TRAVERSAL_KEYS, or KeyboardFocusManager.DOWN_CYCLE_TRAVERSAL_KEYS, or if keystrokes contains null, or if any Object in keystrokes is not an AWTKeyStroke, or if any keystroke represents a KEY_TYPED event, or if any keystroke already maps to another focus traversal operation for this Container
Since:: 1.4
See Also:: getFocusTraversalKeys(int), KeyboardFocusManager.FORWARD_TRAVERSAL_KEYS, KeyboardFocusManager.BACKWARD_TRAVERSAL_KEYS, KeyboardFocusManager.UP_CYCLE_TRAVERSAL_KEYS, KeyboardFocusManager.DOWN_CYCLE_TRAVERSAL_KEYS

getFocusTraversalKeys
```
public Set<AWTKeyStroke> getFocusTraversalKeys(int id)
```
Returns the Set of focus traversal keys for a given traversal operation for this Container. (See setFocusTraversalKeys for a full description of each key.)
If a Set of traversal keys has not been explicitly defined for this Container, then this Container's parent's Set is returned. If no Set has been explicitly defined for any of this Container's ancestors, then the current KeyboardFocusManager's default Set is returned.

Overrides:

getFocusTraversalKeys in class Component

Parameters:
id - one of KeyboardFocusManager.FORWARD_TRAVERSAL_KEYS, KeyboardFocusManager.BACKWARD_TRAVERSAL_KEYS, KeyboardFocusManager.UP_CYCLE_TRAVERSAL_KEYS, or KeyboardFocusManager.DOWN_CYCLE_TRAVERSAL_KEYS

Returns:
the Set of AWTKeyStrokes for the specified operation. The Set will be unmodifiable, and may be empty. null will never be returned.

Throws:

IllegalArgumentException - if id is not one of KeyboardFocusManager.FORWARD_TRAVERSAL_KEYS, KeyboardFocusManager.BACKWARD_TRAVERSAL_KEYS, KeyboardFocusManager.UP_CYCLE_TRAVERSAL_KEYS, or KeyboardFocusManager.DOWN_CYCLE_TRAVERSAL_KEYS
Since:

1.4

See Also:
setFocusTraversalKeys(int, java.util.Set), KeyboardFocusManager.FORWARD_TRAVERSAL_KEYS, KeyboardFocusManager.BACKWARD_TRAVERSAL_KEYS, KeyboardFocusManager.UP_CYCLE_TRAVERSAL_KEYS, KeyboardFocusManager.DOWN_CYCLE_TRAVERSAL_KEYS

areFocusTraversalKeysSet
```
public boolean areFocusTraversalKeysSet(int id)
```
Returns whether the Set of focus traversal keys for the given focus traversal operation has been explicitly defined for this Container. If this method returns false, this Container is inheriting the Set from an ancestor, or from the current KeyboardFocusManager.

Overrides:

areFocusTraversalKeysSet in class Component

Parameters:
id - one of KeyboardFocusManager.FORWARD_TRAVERSAL_KEYS, KeyboardFocusManager.BACKWARD_TRAVERSAL_KEYS, KeyboardFocusManager.UP_CYCLE_TRAVERSAL_KEYS, or KeyboardFocusManager.DOWN_CYCLE_TRAVERSAL_KEYS

Returns:
true if the the Set of focus traversal keys for the given focus traversal operation has been explicitly defined for this Component; false otherwise.

Throws:

IllegalArgumentException - if id is not one of KeyboardFocusManager.FORWARD_TRAVERSAL_KEYS, KeyboardFocusManager.BACKWARD_TRAVERSAL_KEYS, KeyboardFocusManager.UP_CYCLE_TRAVERSAL_KEYS, or KeyboardFocusManager.DOWN_CYCLE_TRAVERSAL_KEYS
Since:

1.4

isFocusCycleRoot
```
public boolean isFocusCycleRoot(Container container)
```
Returns whether the specified Container is the focus cycle root of this Container's focus traversal cycle. Each focus traversal cycle has only a single focus cycle root and each Container which is not a focus cycle root belongs to only a single focus traversal cycle. Containers which are focus cycle roots belong to two cycles: one rooted at the Container itself, and one rooted at the Container's nearest focus-cycle-root ancestor. This method will return true for both such Containers in this case.

Overrides:

isFocusCycleRoot in class Component

Parameters:
container - the Container to be tested

Returns:
true if the specified Container is a focus-cycle- root of this Container; false otherwise
Since:

1.4

See Also:
isFocusCycleRoot()

setFocusTraversalPolicy
```
public void setFocusTraversalPolicy(FocusTraversalPolicy policy)
```
Sets the focus traversal policy that will manage keyboard traversal of this Container's children, if this Container is a focus cycle root. If the argument is null, this Container inherits its policy from its focus- cycle-root ancestor. If the argument is non-null, this policy will be inherited by all focus-cycle-root children that have no keyboard- traversal policy of their own (as will, recursively, their focus-cycle- root children).
If this Container is not a focus cycle root, the policy will be remembered, but will not be used or inherited by this or any other Containers until this Container is made a focus cycle root.

Parameters:
policy - the new focus traversal policy for this Container
Since:

1.4

See Also:
getFocusTraversalPolicy(), setFocusCycleRoot(boolean), isFocusCycleRoot(java.awt.Container)

getFocusTraversalPolicy
```
public FocusTraversalPolicy getFocusTraversalPolicy()
```
Returns the focus traversal policy that will manage keyboard traversal of this Container's children, or null if this Container is not a focus cycle root. If no traversal policy has been explicitly set for this Container, then this Container's focus-cycle-root ancestor's policy is returned.

Returns:
this Container's focus traversal policy, or null if this Container is not a focus cycle root.
Since:

1.4

See Also:
setFocusTraversalPolicy(java.awt.FocusTraversalPolicy), setFocusCycleRoot(boolean), isFocusCycleRoot(java.awt.Container)

isFocusTraversalPolicySet
```
public boolean isFocusTraversalPolicySet()
```
Returns whether the focus traversal policy has been explicitly set for this Container. If this method returns false, this Container will inherit its focus traversal policy from an ancestor.

Returns:
true if the focus traversal policy has been explicitly set for this Container; false otherwise.
Since:

1.4

setFocusCycleRoot
```
public void setFocusCycleRoot(boolean focusCycleRoot)
```
Sets whether this Container is the root of a focus traversal cycle. Once focus enters a traversal cycle, typically it cannot leave it via focus traversal unless one of the up- or down-cycle keys is pressed. Normal traversal is limited to this Container, and all of this Container's descendants that are not descendants of inferior focus cycle roots. Note that a FocusTraversalPolicy may bend these restrictions, however. For example, ContainerOrderFocusTraversalPolicy supports implicit down-cycle traversal.
The alternative way to specify the traversal order of this Container's children is to make this Container a focus traversal policy provider.

Parameters:
focusCycleRoot - indicates whether this Container is the root of a focus traversal cycle
Since:

1.4

See Also:
isFocusCycleRoot(), setFocusTraversalPolicy(java.awt.FocusTraversalPolicy), getFocusTraversalPolicy(), ContainerOrderFocusTraversalPolicy, setFocusTraversalPolicyProvider(boolean)

isFocusCycleRoot
```
public boolean isFocusCycleRoot()
```
Returns whether this Container is the root of a focus traversal cycle. Once focus enters a traversal cycle, typically it cannot leave it via focus traversal unless one of the up- or down-cycle keys is pressed. Normal traversal is limited to this Container, and all of this Container's descendants that are not descendants of inferior focus cycle roots. Note that a FocusTraversalPolicy may bend these restrictions, however. For example, ContainerOrderFocusTraversalPolicy supports implicit down-cycle traversal.

Returns:
whether this Container is the root of a focus traversal cycle
Since:

1.4

See Also:
setFocusCycleRoot(boolean), setFocusTraversalPolicy(java.awt.FocusTraversalPolicy), getFocusTraversalPolicy(), ContainerOrderFocusTraversalPolicy

setFocusTraversalPolicyProvider
```
public final void setFocusTraversalPolicyProvider(boolean provider)
```
Sets whether this container will be used to provide focus traversal policy. Container with this property as true will be used to acquire focus traversal policy instead of closest focus cycle root ancestor.

Parameters:
provider - indicates whether this container will be used to provide focus traversal policy
Since:

1.5

See Also:
setFocusTraversalPolicy(java.awt.FocusTraversalPolicy), getFocusTraversalPolicy(), isFocusTraversalPolicyProvider()

isFocusTraversalPolicyProvider
```
public final boolean isFocusTraversalPolicyProvider()
```
Returns whether this container provides focus traversal policy. If this property is set to true then when keyboard focus manager searches container hierarchy for focus traversal policy and encounters this container before any other container with this property as true or focus cycle roots then its focus traversal policy will be used instead of focus cycle root's policy.

Returns:
true if this container provides focus traversal policy, false otherwise
Since:

1.5

See Also:
setFocusTraversalPolicy(java.awt.FocusTraversalPolicy), getFocusTraversalPolicy(), setFocusCycleRoot(boolean), setFocusTraversalPolicyProvider(boolean)

transferFocusDownCycle
```
public void transferFocusDownCycle()
```
Transfers the focus down one focus traversal cycle. If this Container is a focus cycle root, then the focus owner is set to this Container's default Component to focus, and the current focus cycle root is set to this Container. If this Container is not a focus cycle root, then no focus traversal operation occurs.

Since:

1.4

See Also:
Component.requestFocus(), isFocusCycleRoot(java.awt.Container), setFocusCycleRoot(boolean)

applyComponentOrientation
```
public void applyComponentOrientation(ComponentOrientation o)
```
Sets the ComponentOrientation property of this container and all components contained within it.
This method changes layout-related information, and therefore, invalidates the component hierarchy.

Overrides:

applyComponentOrientation in class Component

Parameters:
o - the new component orientation of this container and the components contained within it.

Throws:

NullPointerException - if orientation is null.
Since:

1.4

See Also:
Component.setComponentOrientation(java.awt.ComponentOrientation), Component.getComponentOrientation(), invalidate()

addPropertyChangeListener
```
public void addPropertyChangeListener(PropertyChangeListener listener)
```
Adds a PropertyChangeListener to the listener list. The listener is registered for all bound properties of this class, including the following:
- this Container's font ("font")
- this Container's background color ("background")
- this Container's foreground color ("foreground")
- this Container's focusability ("focusable")
- this Container's focus traversal keys enabled state ("focusTraversalKeysEnabled")
- this Container's Set of FORWARD_TRAVERSAL_KEYS ("forwardFocusTraversalKeys")
- this Container's Set of BACKWARD_TRAVERSAL_KEYS ("backwardFocusTraversalKeys")
- this Container's Set of UP_CYCLE_TRAVERSAL_KEYS ("upCycleFocusTraversalKeys")
- this Container's Set of DOWN_CYCLE_TRAVERSAL_KEYS ("downCycleFocusTraversalKeys")
- this Container's focus traversal policy ("focusTraversalPolicy")
- this Container's focus-cycle-root state ("focusCycleRoot")
Note that if this Container is inheriting a bound property, then no event will be fired in response to a change in the inherited property.
If listener is null, no exception is thrown and no action is performed.
Overrides:

addPropertyChangeListener in class Component

Parameters:
listener - the PropertyChangeListener to be added
See Also:
Component.removePropertyChangeListener(java.beans.PropertyChangeListener), addPropertyChangeListener(java.lang.String,java.beans.PropertyChangeListener)

addPropertyChangeListener
```
public void addPropertyChangeListener(String propertyName,
                             PropertyChangeListener listener)
```
Adds a PropertyChangeListener to the listener list for a specific property. The specified property may be user-defined, or one of the following defaults:
- this Container's font ("font")
- this Container's background color ("background")
- this Container's foreground color ("foreground")
- this Container's focusability ("focusable")
- this Container's focus traversal keys enabled state ("focusTraversalKeysEnabled")
- this Container's Set of FORWARD_TRAVERSAL_KEYS ("forwardFocusTraversalKeys")
- this Container's Set of BACKWARD_TRAVERSAL_KEYS ("backwardFocusTraversalKeys")
- this Container's Set of UP_CYCLE_TRAVERSAL_KEYS ("upCycleFocusTraversalKeys")
- this Container's Set of DOWN_CYCLE_TRAVERSAL_KEYS ("downCycleFocusTraversalKeys")
- this Container's focus traversal policy ("focusTraversalPolicy")
- this Container's focus-cycle-root state ("focusCycleRoot")
- this Container's focus-traversal-policy-provider state("focusTraversalPolicyProvider")
- this Container's focus-traversal-policy-provider state("focusTraversalPolicyProvider")
Note that if this Container is inheriting a bound property, then no event will be fired in response to a change in the inherited property.
If listener is null, no exception is thrown and no action is performed.
Overrides:

addPropertyChangeListener in class Component

Parameters:
propertyName - one of the property names listed above
listener - the PropertyChangeListener to be added
See Also:
addPropertyChangeListener(java.beans.PropertyChangeListener), Component.removePropertyChangeListener(java.beans.PropertyChangeListener)

Submit a bug or feature
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2011, Oracle and/or its affiliates. All rights reserved.
DRAFT ea-b138

Class Container

Nested Class Summary

Nested classes/interfaces inherited from class java.awt.Component

Field Summary

Fields inherited from class java.awt.Component

Fields inherited from interface java.awt.image.ImageObserver

Constructor Summary

Method Summary

Methods inherited from class java.awt.Component

Methods inherited from class java.lang.Object

Constructor Detail

Container

Method Detail

getComponentCount

countComponents

getComponent

getComponents

getInsets

insets

add

add

add

setComponentZOrder

getComponentZOrder

add

add

addImpl

remove

remove

removeAll

getLayout

setLayout

doLayout

layout

isValidateRoot

invalidate

validate

validateTree

setFont

getPreferredSize

preferredSize

getMinimumSize

minimumSize

getMaximumSize

getAlignmentX

getAlignmentY

paint

update

print

paintComponents

printComponents

addContainerListener

removeContainerListener

getContainerListeners

getListeners

processEvent

processContainerEvent

deliverEvent

getComponentAt

locate

getComponentAt

getMousePosition

findComponentAt

findComponentAt

addNotify

removeNotify

isAncestorOf

paramString

list

list

setFocusTraversalKeys

getFocusTraversalKeys

areFocusTraversalKeysSet

isFocusCycleRoot

setFocusTraversalPolicy

getFocusTraversalPolicy

isFocusTraversalPolicySet

setFocusCycleRoot

isFocusCycleRoot

setFocusTraversalPolicyProvider