| Package | Description |
|---|---|
| javax.print.attribute.standard |
Package javax.print.attribute.standard
contains classes for specific printing attributes.
|
| Modifier and Type | Field and Description |
|---|---|
static PrinterStateReason |
PrinterStateReason.CONNECTING_TO_DEVICE
The printer has scheduled a job on the output device and is in the
process of connecting to a shared network output device (and might not
be able to actually start printing the job for an arbitrarily long time
depending on the usage of the output device by other servers on the
network).
|
static PrinterStateReason |
PrinterStateReason.COVER_OPEN
One or more covers on the device are open.
|
static PrinterStateReason |
PrinterStateReason.DEVELOPER_EMPTY
The device is out of developer.
|
static PrinterStateReason |
PrinterStateReason.DEVELOPER_LOW
The device is low on developer.
|
static PrinterStateReason |
PrinterStateReason.DOOR_OPEN
One or more doors on the device are open.
|
static PrinterStateReason |
PrinterStateReason.FUSER_OVER_TEMP
The fuser temperature is above normal.
|
static PrinterStateReason |
PrinterStateReason.FUSER_UNDER_TEMP
The fuser temperature is below normal.
|
static PrinterStateReason |
PrinterStateReason.INPUT_TRAY_MISSING
One or more input trays are not in the device.
|
static PrinterStateReason |
PrinterStateReason.INTERLOCK_OPEN
One or more interlock devices on the printer are unlocked.
|
static PrinterStateReason |
PrinterStateReason.INTERPRETER_RESOURCE_UNAVAILABLE
An interpreter resource is unavailable (e.g., font, form).
|
static PrinterStateReason |
PrinterStateReason.MARKER_SUPPLY_EMPTY
The device is out of at least one marker supply (e.g.
|
static PrinterStateReason |
PrinterStateReason.MARKER_SUPPLY_LOW
The device is low on at least one marker supply (e.g.
|
static PrinterStateReason |
PrinterStateReason.MARKER_WASTE_ALMOST_FULL
The device marker supply waste receptacle is almost full.
|
static PrinterStateReason |
PrinterStateReason.MARKER_WASTE_FULL
The device marker supply waste receptacle is full.
|
static PrinterStateReason |
PrinterStateReason.MEDIA_EMPTY
At least one input tray is empty.
|
static PrinterStateReason |
PrinterStateReason.MEDIA_JAM
The device has a media jam.
|
static PrinterStateReason |
PrinterStateReason.MEDIA_LOW
At least one input tray is low on media.
|
static PrinterStateReason |
PrinterStateReason.MEDIA_NEEDED
A tray has run out of media.
|
static PrinterStateReason |
PrinterStateReason.MOVING_TO_PAUSED
Someone has paused the printer, but the device(s) are taking an
appreciable time to stop.
|
static PrinterStateReason |
PrinterStateReason.OPC_LIFE_OVER
The optical photo conductor is no longer functioning.
|
static PrinterStateReason |
PrinterStateReason.OPC_NEAR_EOL
The optical photo conductor is near end of life.
|
static PrinterStateReason |
PrinterStateReason.OTHER
The printer has detected an error other than ones listed below.
|
static PrinterStateReason |
PrinterStateReason.OUTPUT_AREA_ALMOST_FULL
One or more output areas are almost full
(e.g.
|
static PrinterStateReason |
PrinterStateReason.OUTPUT_AREA_FULL
One or more output areas are full (e.g.
|
static PrinterStateReason |
PrinterStateReason.OUTPUT_TRAY_MISSING
One or more output trays are not in the device.
|
static PrinterStateReason |
PrinterStateReason.PAUSED
Someone has paused the printer and the printer's
PrinterState is STOPPED. |
static PrinterStateReason |
PrinterStateReason.SHUTDOWN
Someone has removed a printer from service, and the device may be
powered down or physically removed.
|
static PrinterStateReason |
PrinterStateReason.SPOOL_AREA_FULL
The limit of persistent storage allocated for spooling has been
reached.
|
static PrinterStateReason |
PrinterStateReason.STOPPED_PARTLY
When a printer controls more than one output device, this reason
indicates that one or more output devices are stopped.
|
static PrinterStateReason |
PrinterStateReason.STOPPING
The printer is in the process of stopping the device and will be
stopped in a while.
|
static PrinterStateReason |
PrinterStateReason.TIMED_OUT
The server was able to connect to the output device (or is always
connected), but was unable to get a response from the output device.
|
static PrinterStateReason |
PrinterStateReason.TONER_EMPTY
The device is out of toner.
|
static PrinterStateReason |
PrinterStateReason.TONER_LOW
The device is low on toner.
|
| Modifier and Type | Method and Description |
|---|---|
Set<PrinterStateReason> |
PrinterStateReasons.printerStateReasonSet(Severity severity)
Obtain an unmodifiable set view of the individual printer state reason
attributes at the given severity level in this PrinterStateReasons
attribute.
|
| Modifier and Type | Method and Description |
|---|---|
Severity |
PrinterStateReasons.put(PrinterStateReason reason,
Severity severity)
Adds the given printer state reason to this printer state reasons
attribute, associating it with the given severity level.
|
| Constructor and Description |
|---|
PrinterStateReasons(Map<PrinterStateReason,Severity> map)
Construct a new printer state reasons attribute that contains the same
PrinterStateReason-to-Severity mappings as the given map. |
Submit a bug or feature
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2011, Oracle and/or its affiliates. All rights reserved.
DRAFT ea-b138