Constructor Detail

• BandedSampleModel

  public BandedSampleModel(int dataType,
                   int w,
                   int h,
                   int numBands)

  Constructs a BandedSampleModel with the specified parameters. The pixel stride will be one data element. The scanline stride will be the same as the width. Each band will be stored in a separate bank and all band offsets will be zero.

  Parameters:

  dataType - The data type for storing samples.

  w - The width (in pixels) of the region of image data described.

  h - The height (in pixels) of the region of image data described.

  numBands - The number of bands for the image data.

  Throws:

  IllegalArgumentException - if dataType is not one of the supported data types

• BandedSampleModel

  public BandedSampleModel(int dataType,
                   int w,
                   int h,
                   int scanlineStride,
                   int[] bankIndices,
                   int[] bandOffsets)

  Constructs a BandedSampleModel with the specified parameters. The number of bands will be inferred from the lengths of the bandOffsets bankIndices arrays, which must be equal. The pixel stride will be one data element.

  Parameters:

  dataType - The data type for storing samples.

  w - The width (in pixels) of the region of image data described.

  h - The height (in pixels) of the region of image data described.

  scanlineStride - The line stride of the of the image data.

  bankIndices - The bank index for each band.

  bandOffsets - The band offset for each band.

  Throws:

  IllegalArgumentException - if dataType is not one of the supported data types

Method Detail

• createCompatibleSampleModel

  public SampleModel createCompatibleSampleModel(int w,
                                        int h)

  Creates a new BandedSampleModel with the specified width and height. The new BandedSampleModel will have the same number of bands, storage data type, and bank indices as this BandedSampleModel. The band offsets will be compressed such that the offset between bands will be w*pixelStride and the minimum of all of the band offsets is zero.

  Overrides:

  createCompatibleSampleModel in class ComponentSampleModel

  Parameters:

  w - the width of the resulting BandedSampleModel

  h - the height of the resulting BandedSampleModel

  Returns:

  a new BandedSampleModel with the specified width and height.

  Throws:

  IllegalArgumentException - if w or h equals either Integer.MAX_VALUE or Integer.MIN_VALUE

  IllegalArgumentException - if dataType is not one of the supported data types

• createSubsetSampleModel

  public SampleModel createSubsetSampleModel(int[] bands)

  Creates a new BandedSampleModel with a subset of the bands of this BandedSampleModel. The new BandedSampleModel can be used with any DataBuffer that the existing BandedSampleModel can be used with. The new BandedSampleModel/DataBuffer combination will represent an image with a subset of the bands of the original BandedSampleModel/DataBuffer combination.

  Overrides:

  createSubsetSampleModel in class ComponentSampleModel

  Parameters:

  bands - a subset of bands from this ComponentSampleModel

  Returns:

  a ComponentSampleModel created with a subset of bands from this ComponentSampleModel.

  Throws:

  RasterFormatException - if the number of bands is greater than the number of banks in this sample model.

  IllegalArgumentException - if dataType is not one of the supported data types

• createDataBuffer

  public DataBuffer createDataBuffer()

  Creates a DataBuffer that corresponds to this BandedSampleModel, The DataBuffer's data type, number of banks, and size will be consistent with this BandedSampleModel.

  Overrides:

  createDataBuffer in class ComponentSampleModel

  Returns:

  a DataBuffer whose data type, number of banks and size are consistent with this ComponentSampleModel.

  Throws:

  IllegalArgumentException - if dataType is not one of the supported types.

• getDataElements

  public Object getDataElements(int x,
                       int y,
                       Object obj,
                       DataBuffer data)

  Returns data for a single pixel in a primitive array of type TransferType. For a BandedSampleModel, this will be the same as the data type, and samples will be returned one per array element. Generally, obj should be passed in as null, so that the Object will be created automatically and will be of the right primitive data type.

  The following code illustrates transferring data for one pixel from DataBuffer db1, whose storage layout is described by BandedSampleModel bsm1, to DataBuffer db2, whose storage layout is described by BandedSampleModel bsm2. The transfer will generally be more efficient than using getPixel/setPixel.

         BandedSampleModel bsm1, bsm2;
         DataBufferInt db1, db2;
         bsm2.setDataElements(x, y, bsm1.getDataElements(x, y, null, db1),
                              db2);
   

  Using getDataElements/setDataElements to transfer between two DataBuffer/SampleModel pairs is legitimate if the SampleModels have the same number of bands, corresponding bands have the same number of bits per sample, and the TransferTypes are the same.

  If obj is non-null, it should be a primitive array of type TransferType. Otherwise, a ClassCastException is thrown. An ArrayIndexOutOfBoundsException may be thrown if the coordinates are not in bounds, or if obj is non-null and is not large enough to hold the pixel data.

  Overrides:

  getDataElements in class ComponentSampleModel

  Parameters:

  x - The X coordinate of the pixel location

  y - The Y coordinate of the pixel location

  obj - If non-null, a primitive array in which to return the pixel data.

  data - The DataBuffer containing the image data.

  Returns:

  the data for the specified pixel.

  See Also:

  setDataElements(int, int, Object, DataBuffer)

• getPixel

  public int[] getPixel(int x,
               int y,
               int[] iArray,
               DataBuffer data)

  Returns all samples for the specified pixel in an int array. ArrayIndexOutOfBoundsException may be thrown if the coordinates are not in bounds.

  Overrides:

  getPixel in class ComponentSampleModel

  Parameters:

  x - The X coordinate of the pixel location

  y - The Y coordinate of the pixel location

  iArray - If non-null, returns the samples in this array

  data - The DataBuffer containing the image data

  Returns:

  the samples for the specified pixel.

  See Also:

  setPixel(int, int, int[], DataBuffer)

• getPixels

  public int[] getPixels(int x,
                int y,
                int w,
                int h,
                int[] iArray,
                DataBuffer data)

  Returns all samples for the specified rectangle of pixels in an int array, one sample per data array element. ArrayIndexOutOfBoundsException may be thrown if the coordinates are not in bounds.

  Overrides:

  getPixels in class ComponentSampleModel

  Parameters:

  x - The X coordinate of the upper left pixel location

  y - The Y coordinate of the upper left pixel location

  w - The width of the pixel rectangle

  h - The height of the pixel rectangle

  iArray - If non-null, returns the samples in this array

  data - The DataBuffer containing the image data

  Returns:

  the samples for the pixels within the specified region.

  See Also:

  setPixels(int, int, int, int, int[], DataBuffer)

• getSample

  public int getSample(int x,
              int y,
              int b,
              DataBuffer data)

  Returns as int the sample in a specified band for the pixel located at (x,y). ArrayIndexOutOfBoundsException may be thrown if the coordinates are not in bounds.

  Overrides:

  getSample in class ComponentSampleModel

  Parameters:

  x - The X coordinate of the pixel location

  y - The Y coordinate of the pixel location

  b - The band to return

  data - The DataBuffer containing the image data

  Returns:

  the sample in the specified band for the specified pixel.

  See Also:

  setSample(int, int, int, int, DataBuffer)

• getSampleFloat

  public float getSampleFloat(int x,
                     int y,
                     int b,
                     DataBuffer data)

  Returns the sample in a specified band for the pixel located at (x,y) as a float. ArrayIndexOutOfBoundsException may be thrown if the coordinates are not in bounds.

  Overrides:

  getSampleFloat in class ComponentSampleModel

  Parameters:

  x - The X coordinate of the pixel location

  y - The Y coordinate of the pixel location

  b - The band to return

  data - The DataBuffer containing the image data

  Returns:

  a float value that represents the sample in the specified band for the specified pixel.

• getSampleDouble

  public double getSampleDouble(int x,
                       int y,
                       int b,
                       DataBuffer data)

  Returns the sample in a specified band for a pixel located at (x,y) as a double. ArrayIndexOutOfBoundsException may be thrown if the coordinates are not in bounds.

  Overrides:

  getSampleDouble in class ComponentSampleModel

  Parameters:

  x - The X coordinate of the pixel location

  y - The Y coordinate of the pixel location

  b - The band to return

  data - The DataBuffer containing the image data

  Returns:

  a double value that represents the sample in the specified band for the specified pixel.

• getSamples

  public int[] getSamples(int x,
                 int y,
                 int w,
                 int h,
                 int b,
                 int[] iArray,
                 DataBuffer data)

  Returns the samples in a specified band for the specified rectangle of pixels in an int array, one sample per data array element. ArrayIndexOutOfBoundsException may be thrown if the coordinates are not in bounds.

  Overrides:

  getSamples in class ComponentSampleModel

  Parameters:

  x - The X coordinate of the upper left pixel location

  y - The Y coordinate of the upper left pixel location

  w - The width of the pixel rectangle

  h - The height of the pixel rectangle

  b - The band to return

  iArray - If non-null, returns the samples in this array

  data - The DataBuffer containing the image data

  Returns:

  the samples in the specified band for the pixels within the specified region.

  See Also:

  setSamples(int, int, int, int, int, int[], DataBuffer)

• setDataElements

  public void setDataElements(int x,
                     int y,
                     Object obj,
                     DataBuffer data)

  Sets the data for a single pixel in the specified DataBuffer from a primitive array of type TransferType. For a BandedSampleModel, this will be the same as the data type, and samples are transferred one per array element.

  The following code illustrates transferring data for one pixel from DataBuffer db1, whose storage layout is described by BandedSampleModel bsm1, to DataBuffer db2, whose storage layout is described by BandedSampleModel bsm2. The transfer will generally be more efficient than using getPixel/setPixel.

         BandedSampleModel bsm1, bsm2;
         DataBufferInt db1, db2;
         bsm2.setDataElements(x, y, bsm1.getDataElements(x, y, null, db1),
                              db2);
   

  Using getDataElements/setDataElements to transfer between two DataBuffer/SampleModel pairs is legitimate if the SampleModels have the same number of bands, corresponding bands have the same number of bits per sample, and the TransferTypes are the same.

  obj must be a primitive array of type TransferType. Otherwise, a ClassCastException is thrown. An ArrayIndexOutOfBoundsException may be thrown if the coordinates are not in bounds, or if obj is not large enough to hold the pixel data.

  Overrides:

  setDataElements in class ComponentSampleModel

  Parameters:

  x - The X coordinate of the pixel location

  y - The Y coordinate of the pixel location

  obj - If non-null, returns the primitive array in this object

  data - The DataBuffer containing the image data

  See Also:

  getDataElements(int, int, Object, DataBuffer)

• setPixel

  public void setPixel(int x,
              int y,
              int[] iArray,
              DataBuffer data)

  Sets a pixel in the DataBuffer using an int array of samples for input. ArrayIndexOutOfBoundsException may be thrown if the coordinates are not in bounds.

  Overrides:

  setPixel in class ComponentSampleModel

  Parameters:

  x - The X coordinate of the pixel location

  y - The Y coordinate of the pixel location

  iArray - The input samples in an int array

  data - The DataBuffer containing the image data

  See Also:

  getPixel(int, int, int[], DataBuffer)

• setPixels

  public void setPixels(int x,
               int y,
               int w,
               int h,
               int[] iArray,
               DataBuffer data)

  Sets all samples for a rectangle of pixels from an int array containing one sample per array element. ArrayIndexOutOfBoundsException may be thrown if the coordinates are not in bounds.

  Overrides:

  setPixels in class ComponentSampleModel

  Parameters:

  x - The X coordinate of the upper left pixel location

  y - The Y coordinate of the upper left pixel location

  w - The width of the pixel rectangle

  h - The height of the pixel rectangle

  iArray - The input samples in an int array

  data - The DataBuffer containing the image data

  See Also:

  getPixels(int, int, int, int, int[], DataBuffer)

• setSample

  public void setSample(int x,
               int y,
               int b,
               int s,
               DataBuffer data)

  Sets a sample in the specified band for the pixel located at (x,y) in the DataBuffer using an int for input. ArrayIndexOutOfBoundsException may be thrown if the coordinates are not in bounds.

  Overrides:

  setSample in class ComponentSampleModel

  Parameters:

  x - The X coordinate of the pixel location

  y - The Y coordinate of the pixel location

  b - The band to set

  s - The input sample as an int

  data - The DataBuffer containing the image data

  See Also:

  getSample(int, int, int, DataBuffer)

• setSample

  public void setSample(int x,
               int y,
               int b,
               float s,
               DataBuffer data)

  Sets a sample in the specified band for the pixel located at (x,y) in the DataBuffer using a float for input. ArrayIndexOutOfBoundsException may be thrown if the coordinates are not in bounds.

  Overrides:

  setSample in class ComponentSampleModel

  Parameters:

  x - The X coordinate of the pixel location

  y - The Y coordinate of the pixel location

  b - The band to set

  s - The input sample as a float

  data - The DataBuffer containing the image data

  See Also:

  getSample(int, int, int, DataBuffer)

• setSample

  public void setSample(int x,
               int y,
               int b,
               double s,
               DataBuffer data)

  Sets a sample in the specified band for the pixel located at (x,y) in the DataBuffer using a double for input. ArrayIndexOutOfBoundsException may be thrown if the coordinates are not in bounds.

  Overrides:

  setSample in class ComponentSampleModel

  Parameters:

  x - The X coordinate of the pixel location

  y - The Y coordinate of the pixel location

  b - The band to set

  s - The input sample as a double

  data - The DataBuffer containing the image data

  See Also:

  getSample(int, int, int, DataBuffer)

• setSamples

  public void setSamples(int x,
                int y,
                int w,
                int h,
                int b,
                int[] iArray,
                DataBuffer data)

  Sets the samples in the specified band for the specified rectangle of pixels from an int array containing one sample per data array element. ArrayIndexOutOfBoundsException may be thrown if the coordinates are not in bounds.

  Overrides:

  setSamples in class ComponentSampleModel

  Parameters:

  x - The X coordinate of the upper left pixel location

  y - The Y coordinate of the upper left pixel location

  w - The width of the pixel rectangle

  h - The height of the pixel rectangle

  b - The band to set

  iArray - The input sample array

  data - The DataBuffer containing the image data

  See Also:

  getSamples(int, int, int, int, int, int[], DataBuffer)

• hashCode

  public int hashCode()

  Description copied from class: Object
  Returns a hash code value for the object. This method is supported for the benefit of hash tables such as those provided by HashMap.

  The general contract of hashCode is:

  • Whenever it is invoked on the same object more than once during an execution of a Java application, the hashCode method must consistently return the same integer, provided no information used in equals comparisons on the object is modified. This integer need not remain consistent from one execution of an application to another execution of the same application.
  • If two objects are equal according to the equals(Object) method, then calling the hashCode method on each of the two objects must produce the same integer result.
  • It is not required that if two objects are unequal according to the Object.equals(java.lang.Object) method, then calling the hashCode method on each of the two objects must produce distinct integer results. However, the programmer should be aware that producing distinct integer results for unequal objects may improve the performance of hash tables.

  As much as is reasonably practical, the hashCode method defined by class Object does return distinct integers for distinct objects. (This is typically implemented by converting the internal address of the object into an integer, but this implementation technique is not required by the Java^TM programming language.)

  Overrides:

  hashCode in class ComponentSampleModel

  Returns:

  a hash code value for this object.

  See Also:

  Object.equals(java.lang.Object), System.identityHashCode(java.lang.Object)